Liquid Level Sensors

king-gage

View Sample Projects

LiquiSeal D/P Purge Control

dp738

The King-Gage LiquiSeal Purge Control has become an international standard for premium marine transmitters. It features continuous live measurement, therefore it offers a much finer resolution than other sensing technologies. The operating principle is simple as it purges air though a tube that goes to the bottom of the tank. The low flow rate of air will displace any fluid in the tube until completely cleared and equilibrium is achieved. This  ABS approved sensor is perfect for those very difficult applications and is suitable for corrosive or aggressive liquids.

  • standard 24VDC powered 4-20mA output.
  • Low flowrate to minimize compressor usage
  • Perfect for corrosive applications
  • Simple, reliable sensor used by the US navy, off-shore drilling platforms, and other critical applications
  • DATA SHEET

ES2-Electronic Level Transmitter

es2slimline

The King-Gage ES2 transmitter provides continuous tank level measurements for sanitary applications. It’s flush design and FDA approved materials makes it perfect for the food and beverage industry. The sensor can be use in applications that have a clean in place (CIP) protocol. The IP68 connectors, and fully encapsulated board ensures reliability against moisture intrusion and humidity. Work on industry standard 24VDC systems.

  • standard 24VDC powered 4-20mA output.
  • Sanitary design for food and beverage applications
  • 3:1 turndown ratio
  • .02%FS repeatability
  • DATA SHEET

AcraSensor-Pneumatic/Electronic Hybrid Level Transmitter

acrasensor

The King-Gage AcraSensor is a pneumatic/electronic hybrid system that can be used in food, beverage, and industrial applications. The system features a field replaceable titanium diaphragm to minimize downtime and maintenance costs. The sensor is a flush mount clean in place approved design that is temperature isolated. The sensor is coupled with an 868 sensor controller. This controller and sensor combination offers a .007PSI accuracy.

  • hybrid design for difficult applications
  • standard 24VDC powered 4-20mA output.
  • Sanitary design for food and beverage applications
  • field replaceable diaphragm
  • DATA SHEET

Telesensor-Industrial Pneumatic/Electronic Hybrid Level Transmitter

telesensor

The King-Gage TeleSensor is another form of the pneumatic/electronic hybrid system that is focused more on industrial applications. They are desinged to be installed on a standard 2″,3″4″ 150 ANSI flange. It features the same field replaceable titanium diaphragm for easy maintenance. When coupled with the 868 sensor controller is can chive an accuracy of 0.007PSI. This system is popular for chemical processing, paint, asphalt, oil and other similar applications. It can also be used in installations that require intrinsic safety.

  • hybrid design for difficult applications
  • standard 24VDC powered 4-20mA output.
  • field replaceable diaphragm
  • DATA SHEET